TỦ SẠC ẮC QUY CÔNG NGHIỆP PMI

(1075 Lượt)

Công ty TNHH Đầu tư và Phát triển Công Nghệ Mới

Nhà sản xuất, chế tạo

6 yrs

TỦ SẠC ẮC QUY CÔNG NGHIỆP PMI

Liên hệ nhà cung cấp Chat now

Những điểm chính về sản phẩm

Thuộc tính cụ thể của ngành

Nominal Input Voltage

110 VDC / 125 VDC / 144 VDC / 220 VDC / 264 VDC / 360 VDC

Nominal Input Frequency

50 hz. ±

&ge

Total harmonic Distortion (THDi)

&le

Nominal DC Voltage

110 VDC / 125 VDC / 144 VDC / 220 VDC / 264 VDC / 360 VDC

Battery Charging Principle

Constant Current / Constant Voltage

Float Charge Voltage (V/Cell)

2,4 Lead Acid Battery 1,60 NiCd Battery (Based on battery brand and type)

Boost Charge Voltage (V/Cell)

2.23 Lead Acid Battery 1,40 NiCd Battery Based (Based on battery brand and type)

Protections

Input: Thermic-Magnetic Over Current Protection, Over Voltage Protection, Phase Sequence Free Operation (3 Phase), Soft Start, MCB Output: Short Circuit Protection, Over Voltage Protection Battery: L-C filters, Overcurrent and Over Voltage Protection

Measurements

LCD Display for Line Voltage / Frequency / Current (Standard in 1 Phase, Optional for 3 Phase), Battery Output Voltage / Current, Load Output Voltage, Charger Total Output Current

Indicators

Float Mode, Boost Mode, Current Mode, Equalize Mode, Battery Ending, Low Battery, Battery Test Failure, Line Failure, Fan Failure, Over Voltage, Under Voltage, Over Temperature, Rectifier Failure, SCR Fuse Failure, Mains Available, Load MCB, Battery MCB

Adjustable Parameters

Float Charge Voltage, Boost Charge Voltage, Equalize Charge Voltage, Battery Charge Current, Rectifier Total Output Current, Low Battery Voltage Alarm, Earth Fault Leakage Current Alarm (only available in 4 line LCD), Battery Ending Voltage Alarm, Online Battery Test Parameters, Auto Boost Charge Parameters, Password

Event History

Last 250 events recorded and displayed on front panel and on PC via RS 232

Open or closed free alarm contacts

Low Battery, Mains Input Normal / Failure, Charger Failure, Overtemperature, Charger Overvoltage, Load MCB ON/ OFF, Battery MCB ON / OFF, Earth Fault

Sound Alarm

On Warning Messages 2 Short &lsquo

Isolation Transformer

Galvanically Isolated (standard)

Power Factor

0.8

Nominal Output Voltage

110 VAC / 220 VAC / 230 VAC / 240 VAC / 380 VAC / 400 VAC / 415 VAC / 480 VAC

Voltage Tolerance

Static

Dynamic with 100% load change

Overload

125%

10 min.

150%

1 min.

300%

1 sec.

Waveform

Pure Sinusoidal

Total harmonic Distortion (ThDv)

at Linear Load

at Non-Linear Load

Crest Factor

3 : 1 (1 second)

Nominal Output Frequency

While synchronized with the line

50 Hz / 60 Hz ±

While not synchronized with the line

50 Hz / 60 Hz ±

Switching Frequency

16 Khz.

Short-circuit behaviour

3 x Nominal Output Current

Protection

Short Circuit Protection, Over Voltage Protection, Under Voltage Protection, Over Current Protection and Over Temperature Protection

Front Panel Indicatiors

Inverter not Synchronized, Inverter DC Input High/Low, Bypass Out of Limit, Battery Fuse OFF, Bypass MCB OFF, DC Input MCB OFF, Inverter Overload, Internal Overtemperature, Inverter Failure, IGBT SCR Fuse Failure, Bypass Overtemperature Failure, Inverter Output High / Low, Inverter Overtemperature

Front Panel Set Menu

UPS Mode (UPS, ECO, Bypass Inhibit), DC Cut off, Low Battery Level, Output Voltage Adjustment, Set Output Frequency, Auto Start ON/OFF, Date, Alarm Sound ON/OFF, Password

Alarm Contacts (1 Open 1 Closed)

Inverter Failure, Overtemperature, Load on Bypass / Inverter, Inverter not Synchronized, DC Input Low /High, Battery Fuse OFF, Bypass out of Limit, Inverter Overload

Communication (OPTIONAL)

RS 485 / RS 232 / Ethernet Ports, Remote PC Control, Modbus, Profibus, SNMP, DNP 3.0 Protocols and TCP/IP options

Paralleling (OPTIONAL)

Parallel Redundancy

Bypass System

No break semiconductor thyristor &ndash

Nominal Frequency

50/60 Hz ±

Inverter/Bypass transfer time

Inverter failure

Max. 5 msec.

Overload or manual transfer

0 msec.

Bypass/Inverter transfer time

0 msec.

Efficiency

Over Voltage Protection

IEEE 587 4500 A, 110 Joules (standard) / 40kA Surge Arrestor (OPTIONAL)

Electrical Interference Reduction

FCC Part 15 Class B

Electrical Standards

IEC 62040-3 (Performance), EN 50091-1 (Security) / EN 50091-2 (EMC)

Protection Level / Color

IP 20 / RAL 7035 (Standard), (Higher IP rating and different colors are available, please consult)

MTBF

100,000 hrs. (w/out battery group)

Enclosure Material

Mild Steel, Zinc-phosphate coated

Cooling

Forced Fan (Standard) / Natural (OPTIONAL)

Cable Entry

Bottom (Standard) / Top (OPTIONAL)

Lightning

OPTIONAL

Distribution

OPTIONAL

Operating Temperature

-10 / +40 °

Relative humidity

5 &ndash

Operating Altitude

Max. 1000 Mt. (Higher altitudes requires de-rating, please consult )

Noise Level

Max. 60 db

Các thuộc tính khác

Khu vực

Hà Nội

Thương hiệu

Mã sản phẩm

Tên sản phẩm

TỦ SẠC ẮC QUY CÔNG NGHIỆP PMI

Nhà cung cấp

Công ty TNHH Đầu tư và Phát triển Công Nghệ Mới

Đóng gói và giao hàng

Selling Units:

Single item

Single package size:

30X20X15 cm

Single gross weight:

1.500 kg

Thông tin nha cung cấp của bạn

Công ty TNHH Đầu tư và Phát triển Công Nghệ Mới

6 yrs

Vị trí tại VN

Thời gian đáp ứng

≤2h

Tỷ lệ giao hàng đúng hẹn

95%

Sản phẩm Cửa hàng

Mô tả sản phẩm từ nhà cung cấp

Mô tả sản phẩm

Phân phối Chính Hãng tủ sạc ắc quy công suất lớn dùng cho viễn thông, trạm BTS. Kinh nghiệm 15 năm về UPS · Chứng nhận Quốc tế · Hỗ trợ giá tốt cho dự án.

Giá sỉ

0986399898

Giá số lượng lớn

0986399898