Mô tả sản phẩm

Hongfawall panel manufacturers architecture cement design panel composite board production line fiber cement board machinery

Concrete Wall Panel Making Machine for concrete precast houses:

-EPS Sandwich Wall Panel is a new type of high-grade light wall panel material with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives.

- According to the relevant institutions, the new kind of lightweight EPS wall panel has been proved to be sound insulation, fire resistant, radioactive, and water resistance.

- The EPS cement insulated sandwich panel making equipment is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and material conveying to silos.

Hongfa Concrete EPS light weight wall panel production lineIntroduction

1.Materials and features of Hongfa Brand Cement EPS Wall Panels

The concrete EPS light weight sandwich concrete panels are high grade panels with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives.

Products size: length 2440 mm, width 610mm,thickness 60-180, (size and thickness can be adjusted).

2.Common Sandwich precast EPS cement wall panel sizes

L*W*T: 2440mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.

2270mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.

3.Concrete light weight EPS wall panel application

- The size and thickness (60~180mm) of lightweight EPS wall panel can be adjustable.

-For interior and exterior wall partition on steel or concrete structure building, new construction or renovations. It can be widely applied to wall materials of various high and low buildings such as bank, office building, hospital, school, hotel, shopping mall, amusement, old house reconstruction, residence and workshop.

4.Hongfa cocnrete lightweight eps wall sandwich panel advantages

(A)Lightweight:The raw materials usedareLightweight aggregates,fly ash,etc, non-reinforced concrete, gravel and other heavy feedstock. Soit has the characteristics of lightweight, which isonly 1/16 weight ofthe brick and concrete structure.It can significantly reduce the vertical load of the building structure and reduces building weight and project cost.

(B)Insulation Resistance:As this new wallpanelis core ofEPSinsulation materials, which insulation performance is extremely advantageous and meetthebuilding energy efficiency design standards, and rank first among similar products.

(C)Permeability Resistance:The bibulous rate ofthis new wall panelis only 3.3%,which has reached the international advanced levelin the same industry.

(D)Fireproof performance:this kind of wall panel is non-burning, and according to the testing, it is reasonable fireproof materials, for the 90mm thickness wall panel, the fireproof performance can be more 3 hours.

(E)Soundproofing:As new wallpanel is using EPS as core,it has good sound insulation and air aspiration, which ismore than 40 db sound insulation.

Three types of concrete EPS cement sandwich wall panel making machinery machine for small business

1.Hongfa manual vertical EPS concrete lightweight wall panel making machine.

This sandwich concrete dry wall panel is in low investment and highest capacity. This kind of sandwich lightweight wall panel machine can be considered due to the limit of functional requirements.

It can make the sandwich concrete lightweight eps sandwich wall panel with the size: length 2270/2440/3000mm, width 610mm, thickness 60-200mm (size and thickness can be adjusted).

2.Hongfa horizontal type EPS wall panel making machine

This EPS wall panel making machine is automatic type, easy operation and less workers. The automatic horizontal concrete eps wall panel production line features high precise injecting, good controls on the temperatureand raw material mixing, and keeping well withthe foamed material equalwrappingand prevents the bead agglomerate because of the bad temperature control.

It can make the sandwich ligthweight dry wall panel with the size: length 2270/2440/3000mm, width 610mm, thickness 60-200mm (size and thickness can be adjusted).

3: Hongfa automatic verticalconcrete EPS sandwich wall panel making machine.

The EPS lightweight wall panel machine is specializing in the production of light weight wallboard which has a flat surface, smooth and high density and this production line realizes the industrial requirementsof the new building partition panel material.It isautomatic operation,high capacity and with fewer workers.This Hongfa exclusive EPS sandwich dry wall panel machine is designed with simple and reliable operation, mature and stable equipment and technology.The EPS lightweight wall board building machine greatly reduces the labor intensity of production workers and improve wall panel EPS production efficiency.

It can make the lightweight cement dry block wall with the size: length 2270/2440/3000mm, width 610mm, thickness 60-200mm (size and thickness can be adjusted).

Why Choose Hongfa for Concrete EPS light weight wall panel dry wall production line

With over 20 years’ experience in R&D and manufacturing block making machine, fully-automatic brick production line, concrete pipe making machine, concrete mixing plant, as well as light weight EPS wall panel machine, Hongfa Heavy Machinery Co., Ltd. have gained much reputation by its high quality products which meet the ISO9001-2000 standard and with the certificates of CE, SGS, BV etc.

Owning over 67 patents (including invention and practical patents) and gaining “China Well-Known Trademark” honor, Hongfa Machinery is dedicated to providing high quality EPS light wight wall panel making machines to our customers.

Our Service forBrick Making Machine Interlocking Brick MachineSupply