1. Wipe the dust and moisture from the mold surface with a dry towel.
2. Open the lid of the product and squeeze it about 3 mm thick at the mold. Leave it for 3~5 hours and wipe with water.
3. Confirm the sterilization effect, if it is not completely removed, please repeat it.
Precautions for use:
1. Do not use it outside the intended use.
2. Keep ventilation when using. Rubber gloves are recommended.
3. Cover the lid after use and keep out of reach of children.
4. If you accidentally the skin or enter the eyes, please wash it with water immediately.
5. If you accidentally eat, please immediately drink water and vomit and seek medical advice.
6. Fading will appear on the clothes, please be careful.
7. The part that is discolored or stained with metal (yellow silica gel) has no effect.
8. According to the degree of pollution, the sterilization effect will be different.
9. If the solution is frozen or close to the heat source, the solution will become thinner.
Giao hàng qua Daisan Logistics
Thanh toán an toàn
Chính sách hoàn tiền
